Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 17.06.2025 00:00

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

nine

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

Do you think Japan will have same-sex marriage by 2030?

This device then solves the entire problem.

Now when you have a certain ac resistance, then a current flows in a loop.

Upvotes:

A Mix of These Specific Foods Could Help You Avoid Chronic Disease - ScienceAlert

For this case there are devices called Metal oxide varistors (MOV).

These devices are installed between the “hot” and “neutral” and protective ground.

Here is a simplified AC power diagram.

As a guy, how do you know you if you are considered attractive?

One

This is where this question deviates from being a 'generic' question, and becomes more specific.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

I caught my neighbor leaving his 12-year-old son home alone and he has not come back in 6 hours. Should I call CPS?

The other is “what does a “fuse” do?”

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

This one hit behind the barn.

Stronger legs, longer life: Why strong legs are linked to longevity (and 3 ways to achieve it) - Times of India

Edit 2024–10.

2024–10–14 [Omar Gharbi Omar Gharbi ]

But… the neutral is now “floating” because of the 1 ohm resistance.

Why do some films seem to date/age so badly?

In schematic diagrams this is the symbol for a fuse:

At least they know the answer if they wanted it.

He then describes Rainy Season and Lightning.

Is Tinder the best dating app?

This is 'the assistant's answer'

a photo is worth a thousand words.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

Why are Christians quick to say that there are a lot the gay Christians that exist NOW and use that to pretend that Christianity is just loving to gays when the last 40 years of my life they been horrible?

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

The third is lightning and “how it gets conducted into a home.”

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

What is the recommended approach for creating a film or TV script? Should the script be written first or should the story be developed first? Why?

so, what happens?

(Dc diagram shown, AC is similar).

Because the load is inductive, the current lags the voltage.(by a bit).

What do most wives fantasize about?

One is “what exactly is in a ‘surge protector’ ? ”

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

Can the fuse protect the electronic devices from lightning instead of a surge protector.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

He then describes the function of a fuse.

but I think this circuit , shows a few more pieces.

2024–10–16 [ OO OLAOYE OYEBODE ]

eight

[old diagram got deleted by accident]

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

What is lightning?

2024–10–10[John johnson John Johnson ]

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

But it can get overloaded, and no longer works.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

This is where the MOV conducts again, and dissipated the energy.

So, the voltage could go up to 500 volts, and the fuse will not open up.

What does a fuse do?

but this device (an Inductor) … impedes the rapid changes in the current.

[image of Common-mode choke]

An AC voltage/ current source, and an ac inductive load.

First Sentence:

At one ohm, the resistor has a maximum of 1 watt power.

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

A circuit breaker is similar, but is resettable.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

There are two important concepts here.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

There are three different concepts here that are getting confused.

what exactly is a ‘surge’ protector?

These are simplified answers to the original question, and does not change anything I wrote above.

the problem then depends on "how fast does the fuse operate?".

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

The MOV will conduct when the voltage exceeds 50% of line voltage.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

Barnstars:

A fuse is a non-resetable over current circuit protector.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

He then asserts :

It seems Mohan does not understand the difference between a comment and an Answer.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

The bolt then partially travels down the line to your home.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

I post the exact comment here.

It also is a device that limits the change in current flow.